5 Things to Know Before Buying Chemical Transport Truck

If you’re tasked with shipping bulk chemical products, there’s a few things you should understand about chemical transport before you pick up the and call a carrier or freight broker. After all, shipping a chemical product in a bulk liquid tank or dry bulk trailer is a potentially volatile situation, setting it apart from other modes of transport. In this article, we’ll share a few of the most important tips for getting your products on the move safely.

5 key chemical transport tips

Among other information, “knowing your product” entails being able to provide the product’s Safety Data Sheet (SDS) to your transportation providers so that they can understand additional product specifics like:

• Density: The weight per gallon will help us determine the number of trucks required to handle a shipment
• pH: The product’s pH level will tell us what types of tanks or trailers it can be safely transported in (e.g., low pH items will require rubber-lined tanks which are harder to come by than stainless steel and aluminum)
• Viscosity: The product’s viscosity will tell us whether the product can be pumped or if an air compressor can be used

If you are aware of any specific equipment needs, be sure to share them with your partner. In most cases, your provider will understand your product’s equipment requirements – but any information you have can further ensure the safety of your product and the equipment hauling it. Some helpful pieces of information include:

• Can the product be shipped in a stainless-steel tank? Aluminum? Specialized container?
• Are there temperature requirements (i.e., must not fall below a certain temperature)?
• If liquid bulk, does the product foam?
• Are there incompatible prior products (i.e., other types of products that must not have been in the tank or trailer prior to yours)?

3. Share loading and unloading SOPs. In addition to ensuring that your product is transported safely and efficiently, your transport provider also needs to know what to expect at the loading and unloading facilities.

At some facilities, for instance, the driver pulls in, hands paperwork to the security guard, drives to the loading/unloading point and then simply sits in his or her cab while onsite personnel handle all of the loading/unloading.

At other facilities, the opposite is true. The driver may be expected to hook up hoses and perform the entire loading/unloading him or herself. There may be safety videos or short training classes that the driver must watch either on premises or prior to arrival. There may be specific forms of identification required in order for the driver to get loaded/unloaded.

All of this information is important to know ahead of time so that your transportation partner can prepare and avoid delays.

To illustrate, a driver once arrived at a plant to load a liquid chemical. However, the product listed on the SDS sheet, the product listed on the paperwork given to the driver at the loading facility, and the original product name given when the load was booked were three different product names. The driver was pulled over during a random DOT stop and he was written up due to these discrepancies.

From the perspective of the DOT or local law enforcement, they had no idea what was actually in the tank. Should something go wrong with the load, local officials would have no idea what chemical they were dealing with. So, to avoid headaches (and fines) for all involved, be sure that your transportation provider understands the product it is carrying.

Such documentation includes the company’s motor carrier number, operating authority, federal I.D. number, hazmat certification, insurance information and TSA certification. It also includes information related to its drivers such as CDL endorsements and Transportation Worker Identification Credential (TWIC®), which is required by the Transportation Security Administration (TSA) for drivers who wish to enter ports and government facilities. 

When you work with a bulk freight broker instead of dealing with carriers directly, however, this vetting process can be taken off your plate. At Bulk Connection, for instance, we have a compliance department whose sole responsibility is the acquisition and management of carrier documentation.

Contact us to discuss your requirements of Natural Gas Transport Truck. Our experienced sales team can help you identify the options that best suit your needs.

Lean on Bulk Connection for chemical transport