Analyze the selection and use of high-speed couplings

First of all, the definition of high speed. Strictly speaking, if the coupling speed reaches 750r/min-1, it has already reached the high speed requirement. In the actual use process, it is generally recognized that the speed reaches r/min-1 and above, and a dynamic balance experiment is required to ensure the normal use of the coupling.

Contact us to discuss your requirements of High Speed Grid Couplings. Our experienced sales team can help you identify the options that best suit your needs.

With the increase of speed, the requirements of dynamic balance level are getting higher and higher, and dynamic balance is not a panacea. If the machining accuracy and concentricity cannot meet the requirements of dynamic balance, or the quality deviation is too large, it may cause the dynamic balance experiment to fail. Proceeding, or the required balance accuracy cannot be achieved. Here is a concept expressed-high speed, which depends on the machining accuracy and dynamic balance adjustment level.

High-speed couplings are mainly used in test benches, dynamometers, and high-speed running power sources to output torque.

The main selection principles or characteristics of high-speed couplings:

First, the weight is light, and the material selection is based on this principle. The lighter quality is selected as much as possible to facilitate the later adjustment of quality deviations and dynamic balance.

Are you interested in learning more about Half Gear Half Rigid Couplings? Contact us today to secure an expert consultation!

Second, micro-correction, elastic components. No matter how high the accuracy of the mechanical transmission is, the deviation of concentricity and the unbalance of quality are unavoidable. However, the direct rigid connection at high speed generally has the problems of on-site noise and vibration. In terms of practical application, elastic elements are basically necessary. If you really can't find a suitable elastic element, you can temporarily connect it with a rigid coupling, but long-term use, the result of vibration is often easy to damage the connection part, and it will be more difficult to re-install and center.

Third, high-strength elastic elements. Now the most used elastic element is the diaphragm, and the main material of the diaphragm is stainless steel. The choice of stainless steel sheet requires high thickness uniformity, high tensile strength, good surface gloss, excellent and uniform material, and good resilience. The price of stainless steel that is generally suitable for manufacturing high-speed elastic components should be above medium, and the material directly affects the elastic components Service life.

Finally, the machining accuracy. Generally, the machining accuracy with a rotation speed of more than 10,000 revolutions generally needs to be controlled at a higher level.The key size of the coupling, the aperture and keyway, must be within 1 wire tolerance, and the center deviation can be guaranteed at this level.

If you want to learn more, please visit our website Flexible Coupling Types.