Aug. 26, 2024
One of the most important pieces of furniture to get when setting up a gym or a dance studio is a floor to ceiling mirror that will help your clients see their form while they are doing those crunches and/or dance moves. It is, therefore, imperative that you choose the right gym mirrors for your facility.
Northglass contains other products and information you need, so please check it out.
There are a variety of gym mirrors available on the market today. These come in a variety of styles, size, finish, and, of course, the materials that are used in their fabrication. More often than not, many novice gym owners make the mistake of getting something not really appropriate for their health and fitness facility. It is for this reason that you need to explore the different options when choosing the correct gym mirror.
Like any other endeavour, it is crucial to carefully examine all the different parameters that can have a bearing on your choice. Choosing a gym mirror is not unlike picking furniture for your home. You have to have a clear idea of what you want. To help you in making the correct decision, here are some things that you need to consider when buying your mirror for your dance studio or gym.
One of the most important considerations that you will have to factor in is the size of the wall in your facility. It also depends on how you want the mirrors to be placed. If you require an end to end or corner to corner mirror, then you will have to measure the entire length of the wall. If, for example, you only want to put mirrors in certain sections of the wall or even leave a space in the corners, then you will have to measure this too.
The standard width of a gym mirror is 1,220 millimetres or 4 feet. So, you will have to measure the length of your wall and then divide that by either 4 feet or by 1,220 millimetres. If the quotient is not a whole number, then you will need to round it off to the nearest whole number.
For instance, if the length or width of your wall is about 20 feet long or wide, then that means you will need to divide 20 feet by 4 feet to give you 5 sheets of gym mirror. Now, if you want to have space at both corners of the wall, say about 1 foot each, then the total length would be 18 feet.
As for the height of the gym mirror, the standard is 6 feet, although it is not unusual for it to be up to 8 feet. You can actually decide on the height of the mirror and have it cut according to your needs. A lot of people prefer to have a floor to ceiling type of mirror while some would like it to start a bit higher off the floor especially if they have heavy weights or any other gym equipment that may break the glass by accident.
There are two fundamental materials used in the construction of gym mirrors. If it is reflection fidelity that you are after then it's best to use glass. However, caution must be observed as this is not really shatter-proof. If you require a gym mirror that can be designed or styled in a particular form, then your best bet is an acrylic mirror or plastic mirror. Do take note that these are relatively thinner, usually about 3 millimetres, and as such are prone to flexing. Because of this flexing, you may not get the kind of reflection that you want from your mirror.
As a general rule, the thicker the mirror plate, the better and sturdier it is. The problem with thin mirrors like those made of acrylic is that they are prone to flexing. You should always target 3 millimetres or even 5 millimetres. For home use, a 3 mm mirror should suffice. However, if this is for a dance studio or a gym where other people will also be present, then you should always go for the 5 millimetres.
When measuring for the right size of acrylic, it&#;s important to provide the exact specifications to ensure a professional finish. Allow a 2-3mm gap around the edges for a snug fit and ensure that you allow 6-7mm for adjoining corners so that the adjoining seam is secure. We recommend ensuring the wall where the mirrored acrylic is being installed is absolutely flat; if you are not sure, try attaching the acrylic to some MDF, and then attaching the MDF to the wall.
Acrylic mirror sheets are a flexible material, therefore they must be applied to a completely flat surface. We suggest using some MDF to ensure that the mirror is on a completely flat surface. If you are ordering larger dimensions, you might also want to consider the 5mm thick acrylic mirror which is more rigid.
When it comes to fitting your sheet, it couldn&#;t be easier &#; you can either drill the acrylic to the wall, ensuring that you use an appropriate drill bit to avoid damaging the material, or use a non-solvent-based adhesive to simply glue the sheet to the wall. This is more commonly used as a way of installing acrylic as it&#;s easier and quicker than drilling but ensure that you don&#;t apply the adhesive too close to the edge so that it doesn&#;t become visible when you press the sheet to the wall. When applying the adhesive, be sure to spread a very thin even layer across all of the back of the mirror. Failure to do this, or to stick the acrylic to a flat surface could result in a distorted image. One of the main benefits of using plastic sheeting is that it&#;s easy to keep clean and hygienic. It just requires a wipe over with warm soapy water and a clean cloth to remove any dirt or dust.
Now that you have all the information you need you&#;re now more confident about your choice of the perfect gym mirror.
This intact breakage illustrates how tempered glass forms tiny, countless pieces. However, most tempered glass shatters to the ground upon impact.
Note that even though there was a powerful impact, this tempered glass has remained structurally intact.
So for strength and breakage-resistance, temper glasses often is the first consideration. For flexibility, UV-resistance, security and sound considerations, laminated glass is often the product of choice. Both are considered safety glazing materials and can be obtained in a variety of thicknesses and colors or tints. Both are easy to clean and maintain when installed properly.
Keep in mind that tempered glass cannot be cut. Once glass has undergone the tempering process, piercing the surface will cause the glass to explode. If using tempered glass for a project, be sure that all sizing is completed before the glass is tempered. In contrast, laminated glass can typically be cut and sized at any time without issue, which could be a benefit for some projects.
Typically, laminated glass products are a slightly higher price than tempered products of the same type and thickness. The optical clarity for both laminated and tempered glass are excellent in either product will provide many years of satisfactory service in your door or window.
Daniel: So we&#;re here to break some more glass! What do we have today?
Dustin: So this is an insulated unit. This is essentially what most windows are made up of. It&#;s two pieces of glass with a spacer in between that creates dead air space, and that&#;s what insulates it.
Daniel: So this basically what you would find in a residential home for people&#;s windows?
Dustin: Absolutely. Also in a commercial setting; very similiar process. So this pieces of glass is actually a safety glass. It&#;s tempered. Both sides are actually tempered. So it takes a really good shot. It&#;s rigid. But it&#;s point sensitive, which is why we&#;ve given you this fun tool to break it with.
So when it breaks- and it doesn&#;t break like a regular piece of plate glass in big pieces- it breaks into small pieces so if it were to fall on you, obviously it doesn&#;t hurt you as bad. So why don&#;t you show us what happens when you break tempered glass.
So what&#;s really cool about tempered, for me, is that you can typically tell where it breaks from. So it actually spiderwebs from the location. Now, this will continue to crack. It will continue to break.
Daniel: Yeah, we can actually hear it right now.
Dustin: You can hear it, right. And then eventually it will fall out. So tempered glass breaks into these small pieces. Will these cut you? For sure. This can definitely still cut you. It&#;s still glass. But the reality of it is, this doesn&#;t cut you as bad, or can cut you as bad, as what the larger pieces do.
So when tempered glass breaks, it breaks into small pieces. We noticed earlier when you hit it, that you kind of bounced off a time or two, right? You didn&#;t necessarily put much swing into it. Well, tempered is point sensitive because there&#;s energy trapped inside, but it&#;s also edge sensitive. So what I want to let you do, is I want you to hit the edge of it. But instead of using a point, I&#;m going to let you wrench it around and see what you can make happen.
Are you interested in learning more about 4mm mirror glass price? Contact us today to secure an expert consultation!
Daniel: Alright, let&#;s see what happens.
Dustin: Give her a shot!
Daniel: So you can see it&#;s just kind of like a little chip right there.
Dustin: For sure. Now here&#;s an interesting piece of this- a lot of times you find or hear of glass breaking spontaneously, right? Spontaneous glass breakage. Something like this can actually cause this piece of glass to break in six months, or in a year. And if that got chipped at some point during the process of making it, and it still got installed, that can explain some crazy day where this piece of glass blows up.
Daniel: And that&#;s actually really common in the automotive world with sunroofs especially. Those are a lot of times made of tempered glass. People say that they&#;ll just be driving down the road and all of a sudden the sunroof explodes.
Dustin: Yea, it&#;s just one of those things that&#;s really hard to explain and if you try to put a story behind it, there&#;s really no telling. But that right there can cause an issue for sure down the road.
Daniel: Alright, so let&#;s take another stab at it&#;It&#;s tougher than it looks!
Dustin: Alright, there you go. So with the right amount of force and hitting it at the right angle definitely causes the issue of having it come apart. The other beauty of this is, we didn&#;t have the back side to hold it in, so you saw that one actually came apart. Similiar story with the sunroof exploding. So there you have it man, that&#;s kind of how the whole tempering process works.
Daniel: This is laminated glass.
Dustin: This is laminated. So laminated is a type of safety glass. There&#;s essentially three safety glasses. Tempered, laminated, and then an acrylic or plexiglass, which is kind of a plastic base.
So what we have here is two pieces of glass that are laminated together with a film- an adhesive film. And essentially this is annealed, or plate glass, on both sides.
Daniel: And so where would you find this?
Dustin: So interesting fact: Almost everybody looks through this nearly every day because this is what your windshield is made out of. But also we use this in a lot of areas for storefront. If you see a gas station that has been broken into, sometimes this is what we put in to deter thieves from getting in. It&#;s a lot harder to get into.
We also use it in bullet-resistant glass. They laminate multiple pieces together. You&#;ll find it sometimes in residential. And in those cases it&#;s typically in a hurricane (prone) area where you have to have some blast type of glass.
Daniel: Alright well let&#;s take a shot at trying to break this and kind of demonstrate what that laminated interlayer does for the glass to keep it together.
Dustin: For sure!
Daniel: Wow!
Dustin: So that&#;s a great first shot. You can see where it broke from. Just like most glass, you can always see where it spiderwebs from and where it goes. That actually looks a lot like what your windshield looks like when a big rock hits it, right? Maybe not quite that extreme. But you can also tell that it&#;s still intact. This piece of glass&#; integrity is there.
Daniel: It&#;s solid.
Dustin: Correct. I mean, it&#;s not going anywhere. It also is really not likely to cut you. All of these runs that you see&#;
Daniel: It&#;s pretty much totally smooth.
Dustin: It&#;s smooth! It&#;s held together by the interlayer. So why don&#;t you give it a couple more hits in the same spot so we can show just what it takes to literally get through this thing.
So what you can see is the interlayer. You can see the plastic interior of the laminate piece. It actually holds together really really well. So what you&#;ve done is broken the glass away but the interlayer is still there.
Daniel: Yea, so that&#;ll deter theft, like you said, in a storefront. If you&#;re in your automobile and this is your windshield then it&#;s going to keep your windshield together while you&#;re going down the road, or god forbid, if you hit the windshield.
Dustin: So a cool piece of this is, all of this damage that you&#;ve done and this thing is still together. It hasn&#;t come apart. It won&#;t hurt you essentially. It could. But for the most part, this is what makes this a safety glass.
Daniel: Yea, and that&#;s extremely important for residents like in Florida where they have a lot of hurricanes; there&#;s a lot of wind damage; storm damage. So if this was a window on your home, I think you&#;d be pretty safe during a hurricane.
Dustin: For sure. You hear about windows blowing out all the time. This would be one of those windows that doesn&#;t do it.
Still have questions? Submit your inquiry to the glass detective today!
For more why pdlc glassinformation, please contact us. We will provide professional answers.
If you are interested in sending in a Guest Blogger Submission,welcome to write for us!
All Comments ( 0 )