Porous Metal Filter For Culture Vessel OEM and Custom

Author: Adelaide

Nov. 04, 2024

Porous Metal Filter For Culture Vessel OEM and Custom

Product Description

JINTAI contains other products and information you need, so please check it out.

1. Accurate pore size, uniform, and even-distributed apertures. Pore size range: 0.1um to 120 microns;

2. Good breathability, fast gas & liquid flow rate, and uniform divergence.  it is far superior to other peer products with the optimization of special processes in HENGKO.

3. Good filtration dustproof and interception effect, high filtration efficiency. The pore size, speed of the flow, and other performances can be customized as requested;

4. High supporting load capacity, no need to use other auxiliary supports, can be directly used as structural elements;

5. Stable structure, particles are tightly bound without migration, almost inseparable under harsh environments;

6. High fatigue strength and impact stress, high pressure resistant, suitable for applications with a high-pressure difference and flow rate. Sintered porous stainless steel filter elements for long-term usage under high-pressure fluid (40mpa) conditions are available;

7. Resistance to high temperature and heat shock. HENGKO stainless steel filter elements can operate at 600 degrees Celsius, can withstand high temperatures even in oxidized atmospheres;

8. Excellent functions of separation and noise reduction as a result of special multidimensional honeycomb nested capillary structure;

9. Different from other peers, HENGKO stainless steel filter elements haven't been corroded in a variety of environments. The performances of anti-corrosion and rust-proof are close to dense stainless steel products;

10. More than 10K product sizes and types to choose from, customizable as needed for stainless steel filtering products with multiple complex structures;

If you are looking for more details, kindly visit Custom Porous Metal Heterosexual Filter Supplier.

11. Tiny diameter( 5-20 mm), the length of long filter tube can be up to 800 mm;

12. The processable dimension for the plate filter can be up to L 800 * W 450 mm;

13. The maximum diameter for a disc filter can be up to 450 mm;

14. Exquisite product appearance will upgrade your product level and image greatly as apparent parts;

15. A variety of cleaning methods are available, and strong regeneration ability after reverse cleaning has a long service life.

About Porous Metal Filters, Inc.

The History of Porous Metal Filters, Inc.

Porous Metal Filter Inc. (PMF), was established in , has a collective knowledge from over 120 years of experience in porous metal filter media, filtration experience, and fabrication of filtration products. The goal of Porous Metal Filters is to utilize this experience to promote the use of porous metal media in the next generation of advanced filtration and separation products.

At Porous Metal Filters, we manufacture diffusion-bonded porous metal sheets, multi-layered laminate filter media, fabricated filtration elements, leaves, cylinders, cones and more. The Porous Metal Filters SinterPore® product offerings of SLS (single layer sintered), MLS (multi-layer sintered), and CLS (custom layer sintered) are comprised of single and multiple layers of woven stainless wire mesh, non-woven metallic fibers, and perforated sheet and foils. This is used for filtration, separation, flow control, noise reduction, powder fluidization, and many other uses.

The standard materials of construction are 304, 304L, 316, 316L stainless steel. Custom materials such as Alloy 20, Hastelloy C-22 and 276, Monel, and Inconel 600 and 625 are available upon request.

The SinterPore® materials are designed for high-temperature and corrosive environments where the controlled pore size, pore geometry, and permeability characteristics are a prerequisite for optimum filtration. These properties are required in a variety of applications including aerospace, automotive, chemical, pharmaceutical, polymer, food & beverage, oil & gas, and power generation industries.

In addition to filtration media and element manufacture, Porous Metal Filters offers consulting and engineering services including product testing, process evaluation/optimization, and training in filtration principles.

At Porous Metal Filters, we manufacture products to the highest current industry standard and are certified to meet ISO requirements.

Contact us today to learn more!

Are you interested in learning more about Porous Metal Filter Factory? Contact us today to secure an expert consultation!

16

0

Comments

Please Join Us to post.

0/2000

All Comments ( 0 )

Guest Posts

If you are interested in sending in a Guest Blogger Submission,welcome to write for us!

Your Name: (required)

Your Email: (required)

Subject:

Your Message: (required)