Questions You Should Know about sanitation hose supplier

Often the easiest way to replace hoses is by connecting the old hose to the new and pulling the new hose through as you pull the old hose out. Use a male-male connector...cut the ends of both hoses as smoothly as possible, butt them together as tightly as you can to get the smoothest unbroken surface possible...."glue" the hoses onto it (duct tape won't hold if you have to pull hard, clamps can get caught). Cut the new hose off behind the connector.

Before you start, pump out and thoroughly rinse out the tank...flush gallons of water through the toilet and hoses to get them as clean as possible. Put plastic kitchen can liners under hose connections to catch any spills. Start with the highest connections to minimize spills.

--Peggie

Raritan SaniFlex hose RaritanSaniFlex hose has proven to be 100% odor permeation resistant and has the added advantage of being so flexible it can be bent like a hairpin without kinking. Defender currently has it on sale for the lowest price I've eve seen: <$8/ft.Often the easiest way to replace hoses is by connecting the old hose to the new and pulling the new hose through as you pull the old hose out. Use a male-male connector...cut the ends of both hoses as smoothly as possible, butt them together as tightly as you can to get the smoothest unbroken surface possible...."glue" the hoses onto it (duct tape won't hold if you have to pull hard, clamps can get caught). Cut the new hose off behind the connector.Before you start, pump out and thoroughly rinse out the tank...flush gallons of water through the toilet and hoses to get them as clean as possible. Put plastic kitchen can liners under hose connections to catch any spills. Start with the highest connections to minimize spills.--Peggie

If you want to learn more, please visit our website.

Peggie Hall HeadMistress said:

But Jabsco has always chosen to "march to their own drum" and their toilet discharge fittings have always been 1"...requiring Jabsco toilet owners to use adapters to connect their toilets to holding tanks.

Click to expand

Hate to disagree with you but here's a picture of my old Jabsco in place before I replaced it with a Raritan PH ll Superflush.

Further reading:
Anyone here make money from sand blasting?

With competitive price and timely delivery, MIC sincerely hope to be your supplier and partner.

The three white hoses shown are 3/4" dia. and the black discharge hose is 1-1/2" dia. It was removed from the toilet outlet fitting to the tank in one solid length. No adapters used from the factory. The corresponding fitting on the tank was 1-1/2" dia. The old permeated black hose was replaced with 1-1/2" Trident Premium #102 hose in one solid length.

Don't have any old Jabsco parts left lying around as I wanted no bad memories remaining, but the toilet bowl discharge had to be 1-1/2" dia.

The 1-1/2" outlet is also implied in the Jabsco installation manual :

This can be found on page 2 of the Installation Manual below.

Hate to disagree with you but here's a picture of my old Jabsco in place before I replaced it with a Raritan PH ll Superflush.The three white hoses shown are 3/4" dia. and the black discharge hose is 1-1/2" dia. It was removed from the toilet outlet fitting to the tank in one solid length. No adapters used from the factory. The corresponding fitting on the tank was 1-1/2" dia. The old permeated black hose was replaced with 1-1/2" Trident Premium #102 hose in one solid length.Don't have any old Jabsco parts left lying around as I wanted no bad memories remaining, but the toilet bowl discharge had to be 1-1/2" dia.The 1-1/2" outlet is also implied in the Jabsco installation manual :This can be found on page 2 of the Installation Manual below.

Want more information on sanitation hose supplier? Feel free to contact us.